Client application on PC
To run the
- From the Start menu > JMobile Suite >HMI Client: the client opens in a browser-like style window.
- Type the server/device IP address in the address bar (for example: https://192.168.40.16): HMI Client will connect to the server and the same graphical application running on the device will be loaded in the client window.
The Client application toolbar
| Element | Description |
|---|---|
| HMI server address |
IP address of the remote HMI device (e.g. 192.168.40.16) |
| Connection status | Network request status. Red during data exchange. |
| Reload from cache | Reloads project |
|
BookMark |
Bookmarks preferred pages and reload them. |
| Settings | Opens Settings dialog |
Reload options
| Option | Description |
|---|---|
| F5 | Reloads project from cache |
| Shift + F5 | Downloads project to client |
Transferring files to a remote HMI device
You can upload and download files to and from a remote HMI device using two dedicated actions. These actions can only be used from a remote HMI Client and access remote files via FTP.
See "Remote Client actions" and "Remote Client variables".
Important: Enable FTP support and give all necessary user rights to the folders used to transfer files.
Workspace
Project files are uploaded from the device and stored in HMI Client into the following cache folder.
%appdata%\Exor\[build number]\client\cache
where:
[build number] = folder named as build number, for example 01.90.00.608.