Controls
On handheld devices, different controls may be available, the status of which is accessible through system variables ("X variables"), while in the base the status is made accessible through the Device Property Publisher Module ("Device Property Publisher").
| Controls | Range | Note |
|---|---|---|
| Two potentiometers | 0..255 | |
| Hand wheel | 0..32767 | |
| Emergency button | 0/1 | (Safety module) |
| Enabling button | 0/1 | (Safety module) |
| Safety selector | 0..15 | (Safety module) |
| Light Sensor | --- | Lux |
| Proximetry Sensor | 0/1 | |
| Digital Output | --- | Available in the base |
Some controls are not available on all models. Check the device's technical specifications to see which controls are available.
Special keyboard configuration
On Wireless and PoE models, some key combinations are managed to turn the device on or off, or to bring up the pairing interface with the base.
Press the buttons below to Turn ON the device; hold the same buttons for 5 seconds to Turn OFF the device.
| X5 | F2 + F5 | |
| X7 | Play + K2 | |
| X10 | minus1 + F2 |
Press the buttons below to open the Pairing Interface of the handheld device with the base.
| X5 | K1 + K4 | |
| X7 | ESC + K2 | |
| X10 | minus6 + K2 |